Safe Dry dehumidifier protects your guns against corrosion. Place it in your gun safe and make sure that your guns and rifles are protected against rust.
It is made of natural granules, which are used to indicate the levels of humidity.
When dry, the granules in the dehumidifier contain no moisture and the indicator shows a blue color. If the indicator turns from blue to pink, it means that the degree of saturation of the granules is soon reached.
With a dry weight of only 330g and dimensions of 21 x 14 x 4.5 cm you can place the Safe Dry dehumidifier in the back of your gun safe.
|Produktnamn||Safe Dry Dehumidifier for Gun Safes|
|Kompatibilitet||SafeGear Gun Safe Light, SafeGear Gun Safe 1, SafeGear Gun Safe 2 / 3, SafeGear Gun Safe 4 / 5|
|Höjd - utvändig (mm)||0|
|Bredd - utvändig (mm)||0|
|Djup - utvändigt||0|
|Djup - utvändigt inkl. lås (mm)||0 kr|
|Höjd - invändig (mm)||0 kr|
|Bredd - invändig (mm)||0 kr|
|Djup - invändigt||0 kr|
Gun safes are small spaces with limited ventilation where humidity can build up. Depending on the place you have installed your gun safe and the external temperature, your gun cabinet can have a very high humidity level. Safe Dry Dehumidifier is ideal for reducing humidity in your gun safe and prevents rust, mold, mildew and corrosion.
The natural granules that are made of work as an indicator of humidity level. When dry, the granules in the dehumidifier contains no moisture and the indicator shows a blue color. If the indicator turns from blue to pink, the degree of saturation of the granules is soon reached.
Depending on the temperature and relative humidity, the SafeDry weapon cabinet dehumidifier is active for 2-6 months without having to be regenerated.
For reuse, the dehumidifier can be easily dried on a radiator. You should only take the dehumidifier out of your gun safe and place it face down on a heater. If you are not sure when the dehumidifier is ready for use again, you can always check its weight. The dry weight is expected to be around 330g.
With dimensions of 21 x 14 x 4.5 cm Safe Dry dehumidifier can be placed where you want in your gun safe. It can absorb up to 180g of water. You will know that the maximum level of humidity is reached when the humidity indicator turns from blue to pink.
If you have any questions about the Safe Dry Dehumidifier you can call us or write us an Email. The SafeGear experts are ready to answer any questions you may have.
SafeGear offers you a wide variety of delivery options. We find the best delivery partners and ensure fast and safe delivery. To our services belongs delivery with or without installation and standard or express delivery. The following guideline will give answers to all questions you may have.
Find below the most Frequently Asked Questions regarding security, battery and other concerns of Safe Locks.
Be aware that there are no wiring or piping in the location you want to install the safe.
Follow these steps to bolt your safe:
You can easily bolt your safe following 8 simple steps.
|1. Place the safe onto its final position.|
|2. Mark the spot on the floor or the wall where the bolting holes are located.|
|3. Move the safe aside.|
|4. Make sure you use the right drill for the material and an appropriately sized drill bit.|
|5. Drill holes into the designated marks.|
|6. Reposition the safe over the mounting hole.|
|7. Insert the bolt through the inside of the safe into the hole.|
|8. Tighten up the nut of the bolt.|